small/simple hut

[Rach.]

*Disclaimer: please be careful when cutting! young viewers may need assistance or supervision from adult!*

*NOTE* houses and doorways should be sized according to your pet(s)! keep in mind that this is only an example!!


start by cutting four equal lengths of cardboard (keep in mind the sizes of your pets when cutting. you want to make sure they will have enough room to move around inside) next place them in a straight line overlapping the edges and mark where you want your holes to be on each piece (line them up as best as possible, this is why i said to overlap them). punch all holes with a hole punch and feed thread through and tie as tight as you can. cut a piece of cardboard a bit gibber than the top and punch holes in what hangs over. place the top on the "hut" and mark where your holes fall. punch the holes and secure it with string. finish up by cutting hole(s) for the door(s) (again keep in mind the size of your hammies).

[Tyler]

do you have any pictures, i'm not sure if i understand fully but it sounds good.